Kayayyaki
120W Single Output Mai hana ruwa Canjawar Wutar Lantarki LDV-120 jerin
A cikin tsarin amfani da wutar lantarki mai hana ruwa ruwa, abu na farko da injiniyoyi ke buƙatar kulawa shi ne yanayin zafin kai na wutar lantarki mai sauyawa.A al'ada, tashin zafin na'urorin wutar lantarki mafi kyawu da aka kwatanta da wutar lantarki za a kiyaye shi a kusan 25-30 ° C, yayin da yanayin zafi mafi girman da aka nuna zai wuce 35 ° C.Wutar wutar lantarki da ake amfani da ita a cikin hasken jama'a da wuraren haskakawa na waje yana buƙatar zama mai hana ruwa, kuma ana buƙatar shingen da aka rufe.Don inganta matakin kariya, mai ƙira yana buƙatar cika manne.Farashin kayan colloidal daban-daban ya bambanta, kuma aikin tafiyar da zafi shima ya bambanta, wanda yake da arha.Siyar da manne yana da ƙarancin ƙarancin zafin jiki kuma yana buƙatar yin burodi mai zafi, wanda galibi yana haifar da lalacewa marar ganuwa da matsanancin nau'ikan nau'ikan kayan aiki daban-daban, yana barin haɗari.
Wata matsala da ya kamata a lura da ita a nan ita ce, yayin aiki, a duk lokacin da zafin wutar lantarki na wutar lantarki ya tashi da 10 ° C, tsawon rayuwar zai ragu, wanda zai shafi rayuwar aikinsa kai tsaye.A halin yanzu, ma'aikatan fasaha masu alaƙa a kasar Sin sun ba da shawarar ko za a iya amfani da yumbu ko na'urorin ƙarfin wuta a filin haske.Koyaya, tare da fasahar Capacort na yanzu, ba ɗayan nau'ikan masu ɗaukar hoto guda biyu ba za a iya yin su cikin ƙarfi-wutar ƙarfi da ƙarfi, wanda yake baƙin ciki, wanda yake abin nadama.Duk da haka, yin amfani da capacitors na tsawon rai bazai tabbatar da rayuwar wutar lantarki ba.Don haɓaka rayuwar wutar lantarki, ana buƙatar haɓakawa ta hanyoyi da yawa, kamar yin amfani da capacitors tare da mafi girman rayuwa, ƙara ƙarfin samar da wutar lantarki, inganta haɓakar wutar lantarki, ko hasken wutar lantarki, da sauransu.
120W Single FitowaMai hana ruwa ruwa CanjawaTushen wutan lantarkiLDV-120 jerin
Babban inganci, Babban aminci, ƙarancin farashi
Kariya: Gajeren kewayawa/Sama da kaya/Sama da wutar lantarki/Maɗaukakin zafin jiki
Mai hana ruwa daraja: IP67
Mitar Aiki: 65KHz
Ya dace da aikace-aikacen alamar haske da motsi na LED.
2 shekaru garanti
| BAYANI | |||
| FITARWA | |||
| Samfura | Saukewa: LDV-120-12 | Saukewa: LDV-120-24 | Saukewa: LDV-120-36 |
| DC Voltage | 12V | 24V | 36V |
| Ƙimar Yanzu | 10 A | 5A | 3.3A |
| Range na Yanzu | 0-10A | 0-5A | 0-3.3A |
| Ƙarfin Ƙarfi | 120W | 120W | 119W |
| Ripple & Surutu | 100mVp-p | 150mVp-p | 150mVp-p |
| Haƙurin wutar lantarki | ± 1% | ± 1% | ± 1% |
| Kwanciyar Shiga | ± 0.5% | ± 0.5% | ± 0.5% |
| Load Kwanciyar hankali | ± 0.5% | ± 0.5% | ± 0.5% |
| Saita, Tashi, Tsayawa Lokaci | 80ms,36ms,20ms/230VAC | ||
| INPUT | |||
| Wutar lantarki | 180 ~ 264 VAC 47 ~ 63 ： 255 ~ 373VDC | ||
| AC Yanzu | 1.5A/230VAC | ||
| inganci | 82% | 84% | 85% |
| Inrush Yanzu | Cold-fara na yanzu 40A/230VAC | ||
| KARIYA | |||
| Over Load | 105% ~ 135% | ||
| Kariya: Yanayin Hiccup, yana murmurewa ta atomatik bayan an cire yanayin kuskure | |||
| Muhalli | |||
| Yanayin Aiki, Humidity | -10 ℃ ~ + 60 ℃, 20% ~ 90% RH | ||
| Ma'ajiya Temp., Danshi | -20 ℃ ~ + 85 ℃, 10% ~ 95% RH | ||
| Temp.Coefficient | ±0.03%/℃(0-50℃) | ||
| Jijjiga | 10-500Hz,2G 10min,/1 sake zagayowar,Lokaci na 60min,Kowace gatari | ||
| TSIRA | |||
| Tsare Wuta | I/PO/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC | ||
| Resistance Warewa | I/PO/P, I/P-FG, O/P-FG: 100M Ohms/500VDC | ||
| STANDARD | |||
| Matsayin Tsaro | EN61347-1 EN61347-2-13 IP67 | ||
| EMC Standard | EN55015 EN61547 EN61000-3.4 CLASSB | ||
| WASU | |||
| Girma | 215*69*43(L*W*H) | ||
| Nauyi | 1.3kg | ||
