Kayayyaki
OPIP-0800W- Mai Canza Wutar Wuta Mai Tsabta
· Abubuwan shigarwa da fitarwa sun keɓance
THD <3%
· Alamomin LED suna nuna yanayin aiki da gazawar
· Kariya: overload, kan ƙarfin lantarki, shigar da baya polarity, short circuit da dai sauransu
Jimlar 100% tsaftataccen igiyar igiyar ruwa 12v mai jujjuyawar igiyar ruwa mai tsafta
· Mai sanyaya ta DC fan a ciki
Zaku iya ƙasa da 12V 800W tsarkakakken inverter sine don kare shi
| Samfura | Bayani na OPIP-0800-1 | Bayani na OPIP-0800-1 | Bayani na OPIP-0800-1 | Saukewa: OPIP-0800-2 | Saukewa: OPIP-0800-2 | Saukewa: OPIP-0800-2 |
| Ƙarfin ƙima | 800W | |||||
| Ƙarfin ƙarfi | 1600W | |||||
| Wutar shigar da wutar lantarki | DC12V | Saukewa: DC24V | DC48V | DC12V | Saukewa: DC24V | DC48V |
| Fitar wutar lantarki | 100VAC ko 110VAC ko 120VAC±5% | 220VAC ko 230VAC ko 240VAC±5% | ||||
| Sauke halin yanzu ƙasa da | 0.8A | 0.5A | 0.3A | 0.8A | 0.5A | 0.3A |
| Mitar fitarwa | 50Hz±0.5Hz ko 60Hz±0.5Hz | |||||
| Fitowar igiyar ruwa | Tsabtace Sine Wave | |||||
| Waveform murdiya | THD＜3% (Lokaci na layi) | |||||
| tashar USB | 5V 1 ku | |||||
| Max. inganci | 90% | |||||
| Wurin shigar da wutar lantarki | 10-15.5V | 20-31V | 40-61V | 10-15.5V | 20-31V | 40-61V |
| Ƙararrawar ƙaramar wuta | 10.5±0.5V | 21±0.5V | 42±1V | 10.5±0.5V | 21±0.5V | 42±1V |
| Low ƙarfin lantarki kariya | 10±0.5V | 20±0.5V | 40±15V | 10±0.5V | 20±0.5V | 40±15V |
| Over ƙarfin lantarki kariya | 15.5±0.5V | 31±0.5V | 61±1V | 15.5±0.5V | 31±0.5V | 61±1V |
| Low ƙarfin lantarki dawo | 13±0.5V | 24±0.5V | 48±1V | 13±0.5V | 24±0.5V | 48±1V |
| Fiye da ƙarfin lantarki dawo | 14.8V±0.5V | 29.5V±0.5V | 59V±1V | 14.8V±0.5V | 29.5V±0.5V | 59V±1V |
| Ayyukan kariya | Ƙananan ƙarfin lantarki | Ƙararrawa da farko, ƙarfin lantarki yana raguwa.LED jan haske a kunne & rufe shuka. | ||||
| Sama da wutar lantarki | LED jan haske a kunne, rufe | |||||
| Sama da kaya | LED jan haske a kunne, rufe | |||||
| Sama da zafin jiki | Ƙararrawa da farko, zafin jiki yana ƙaruwa | |||||
| Gajeren kewayawa | LED Red haske a kunne | |||||
| Shigar da jujjuyawar polarity | Fuse mai ƙonewa | |||||
| Yanayin aiki | -10°- +50° | |||||
| Yanayin ajiya | -30°- +70° | |||||
| Girma (mm) | 296x180x78mm | |||||
| Shirya (mm) | 360x335x100mm | |||||
| Net / babban nauyi (g) | 2760/3230g | |||||
| QTY/Ctn | 8 inji mai kwakwalwa | |||||
| Ma'auni./Ctn(mm) | 500x400x415mm | |||||
| Babban nauyi/Ctn(g) | 25840g | |||||
| Garanti | 1.5 shekaru | |||||
| Kanfigareshan | Daidaitawa | |||||
| Hanyar sanyaya | Mai sanyaya iska mai hankali | |||||
| Lura: Samfuran mu suna ɗaukaka koyaushe.Ma'aunin fasaha don tunani kawai.Da fatan za a koma zuwa ainihin samfurin mu. | ||||||
1, ƙarfin wutar lantarki na DC ya kamata ya kasance daidai
Kowane inverter yana da damar yin amfani da ƙimar ƙarfin lantarki na DC, kamar 12V, 24V, da sauransu, ana buƙatar zaɓar ƙarfin baturi dole ne ya yi daidai da ƙarfin shigar da DC na inverter. Misali, inverter 12V dole ne ya zaɓi baturi 12V.
2. Ƙarfin fitarwa na inverter dole ne ya fi ƙarfin na'urorin lantarki, musamman ga na'urorin lantarki masu girma da yawa lokacin farawa, kamar firiji da kwandishan, amma kuma suna barin babban gefe.
3. Dole ne a haɗa na'urorin lantarki masu kyau da marasa kyau daidai
Wutar wutar lantarki na DC wanda aka haɗa inverter zuwa gare shi yana da alamar tabbatacce kuma mara kyau. Ja yana da kyau (+), baƙar fata mara kyau (-), baturin kuma yana da alamar tabbatacce da korau, ja yana da kyau (+), baki ne. korau (-), dole ne a haɗa haɗin zuwa tabbatacce (ja), korau (baƙar fata) .Dole ne a haɗa diamita na waya mai kauri sosai kuma ya kamata a rage girman haɗin haɗin.
4, ya kamata a sanya shi a cikin iska, bushe wuri, kula da ruwan sama, kuma tare da abubuwan da ke kewaye da su suna da nisa fiye da 500px, nesa da kayan wuta da fashewa, kada a sanya a kan na'ura ko rufe wasu abubuwa, amfani da zafin muhalli bai fi 40 ℃ ba.
